Özteknik Makine manufactures OZKM80 gang-saw, equipped with maximum 80 diamond blades, to transform a stone block to many slabs simultaneously and efficiently.
Özteknik Makine’s OZKM80 gang-saws employ components that are carefully designed to transfer the movement to the blade rack, flywheel and the connecting rods. The 3.5 meter flywheel is of cast iron, and guarantees a constant cutting speed. Flywheel drive shaft, produced from steel, and two cast iron supports and two spherical roller bearings on both sides ensure the flywheel’s continuous motion.
The blade holder, or blade rack, is made of steel plates joined solidly together, and slides on straight articulated guides that require little to no maintenance.
Two cranks on the flywheel driveshaft drive the two connecting rods that transfers the movement to the blade rack. The connecting rods are made out of machined steel monoblock. With this way, power and thrust is transferred to the blade holder via two rods instead of one. In addition, any risk of deviation in the movement of blade holder is therefore removed.
The 132 kW motor incorporates soft starter system. Starting from slow, it gradually speeds up in a controlled manner. It drives the flywheel with high quality, heat and oil-resistant V-belts with low friction coefficient.
The block to be cut is loaded onto a carrier and lifted up by an elevator mechanism and is escalated upward, which is cut buy the diamond blades that move reciprocally. The other carrier serves the purpose of moving the block on rails for loading and unloading purposes.
OZKM80 is equipped with a touchscreen and PLC to program the machine and to monitor/control the work cycles. Electrical and electronic components of unmatched quality are procured from world-renowned brands and are assembled meticulously to the machines.
Manufactured parts are the products of 40 years of experience and high quality machinery and tools employed by Özteknik Makine.
As a safety measure, OZKM80 is fitted with a quick stop system. When soft starter is activated, the motor slows down to a standstill in a short time period. This system is better than powering the motor with reverse current to slow it down and does not harm the motor. The system also possesses sensors monitoring whether the slab has broken or not. In addition, steel gangways with railings and steps provide ease of maintenance and safety for the operators.
OZKM80 can cut through stone blocks easily and rapidly thanks to the blade travel running 95 strokes per minute and robust, large diameter flywheel. Possessing the ability to handle blocks that are max. 3200x2000x2100 mm in size, OZKM80 is a must-have for marble processing factories.
| Number of Blades (Max. 20mm) | : 80 Pcs |
| Cutting Stroke Count | : 95 Pcs |
| Main Motor Power | : 132 kW |
| Cutting Motor Power | : 11 kW |
| Max. Block Dimension | : 3200x2000x2100 mm |
| Water Consumption | : 800 Lt/min |
| Total Weight | : 54000 kg |
Özteknik Makine manufactures OZKM80 gang-saw, equipped with maximum 80 diamond blades, to transform a stone block to many slabs simultaneously and efficiently.
Özteknik Makine’s OZKM80 gang-saws employ components that are carefully designed to transfer the movement to the blade rack, flywheel and the connecting rods. The 3.5 meter flywheel is of cast iron, and guarantees a constant cutting speed. Flywheel drive shaft, produced from steel, and two cast iron supports and two spherical roller bearings on both sides ensure the flywheel’s continuous motion.
The blade holder, or blade rack, is made of steel plates joined solidly together, and slides on straight articulated guides that require little to no maintenance.
Two cranks on the flywheel driveshaft drive the two connecting rods that transfers the movement to the blade rack. The connecting rods are made out of machined steel monoblock. With this way, power and thrust is transferred to the blade holder via two rods instead of one. In addition, any risk of deviation in the movement of blade holder is therefore removed.
The 132 kW motor incorporates soft starter system. Starting from slow, it gradually speeds up in a controlled manner. It drives the flywheel with high quality, heat and oil-resistant V-belts with low friction coefficient.
The block to be cut is loaded onto a carrier and lifted up by an elevator mechanism and is escalated upward, which is cut buy the diamond blades that move reciprocally. The other carrier serves the purpose of moving the block on rails for loading and unloading purposes.
OZKM80 is equipped with a touchscreen and PLC to program the machine and to monitor/control the work cycles. Electrical and electronic components of unmatched quality are procured from world-renowned brands and are assembled meticulously to the machines.
Manufactured parts are the products of 40 years of experience and high quality machinery and tools employed by Özteknik Makine.
As a safety measure, OZKM80 is fitted with a quick stop system. When soft starter is activated, the motor slows down to a standstill in a short time period. This system is better than powering the motor with reverse current to slow it down and does not harm the motor. The system also possesses sensors monitoring whether the slab has broken or not. In addition, steel gangways with railings and steps provide ease of maintenance and safety for the operators.
OZKM80 can cut through stone blocks easily and rapidly thanks to the blade travel running 95 strokes per minute and robust, large diameter flywheel. Possessing the ability to handle blocks that are max. 3200x2000x2100 mm in size, OZKM80 is a must-have for marble processing factories.
